WireGuard

MikroTik WireGuard VPN for Phone and Laptop (Remote Access)

Let staff reach the office network from a phone or laptop with WireGuard on RouterOS v7: server interface, one peer per device, client app settings and firewall.

Commands in this article follow RouterOS v7 documentation but have not yet been marked as lab-tested on this site. Always test changes in a lab or maintenance window and keep a backup.

Problem

You need secure access to the office network (file server, NVR, router) from a phone or laptop while travelling.

Symptoms

  • The WireGuard app shows "connected" but nothing opens.
  • It works on Wi-Fi but not on mobile data, or the reverse.

Likely causes

Each device must be a separate peer with its own key and tunnel address. The router must accept the UDP port, and the client's AllowedIPs decide which traffic goes into the tunnel.

Prerequisites

  • RouterOS v7, a public IP or a DDNS name (IP > Cloud).
  • The WireGuard app on the phone or laptop.
  • Example: office LAN 192.168.88.0/24, VPN subnet 10.88.0.0/24.

Solution (WinBox / CLI)

1. Server interface and address:

RouterOS CLI
/interface wireguard add name=wg-remote listen-port=13232
/ip address add address=10.88.0.1/24 interface=wg-remote
/interface list member add list=LAN interface=wg-remote
/ip firewall filter add chain=input protocol=udp dst-port=13232 action=accept comment="WireGuard remote" place-before=0
/interface wireguard print

Copy the router's public key from the last command.

2. In the app on the phone, create a new tunnel and copy its public key. Set:

  • Interface address: 10.88.0.2/32
  • DNS: 192.168.88.1
  • Peer public key: the router's public key
  • Endpoint: your public IP or DDNS name, port 13232
  • Allowed IPs: 192.168.88.0/24 (office only) or 0.0.0.0/0 (all traffic through the office)

3. Add the phone as a peer on the router:

RouterOS CLI
/interface wireguard peers add interface=wg-remote public-key="PHONE_PUBLIC_KEY" allowed-address=10.88.0.2/32 comment="Staff phone 1"

Repeat with 10.88.0.3/32, 10.88.0.4/32 and so on for each device.

Verification

  • In the app, the handshake time updates and data counters increase.
  • On the router: /interface wireguard peers print detail shows last-handshake for that peer.
  • Open 192.168.88.1 in the phone's browser on mobile data.

Common errors

  • Two devices with the same tunnel address or key: only one works at a time.
  • 0.0.0.0/0 on the phone but no masquerade for 10.88.0.0/24: no internet while connected. A masquerade rule on the WAN interface list covers it.
  • The office is behind ISP CGNAT: there is no public IP to connect to. Ask the ISP for a public IP.

Rollback

RouterOS CLI
/interface wireguard peers disable [find comment="Staff phone 1"]

Disable one peer to cut access for a lost phone without affecting others.

Go deeper in class

This topic is covered hands-on in MTCSE — MikroTik Certified Security Engineer.

View MTCSE
WhatsApp