How to Upgrade MikroTik RouterOS v6 to v7 Safely
Upgrade a MikroTik router from RouterOS v6 to v7 without surprises: backups, the upgrade channel, firmware update, what changes after the upgrade, and how to roll back.
Problem
Your router still runs RouterOS v6 and you want the newer features of v7 (WireGuard, new routing engine, newer Wi-Fi drivers), but you are worried about breaking the configuration.
Symptoms
check-for-updatesonly offers v6 versions.- After an upgrade, OSPF, BGP or policy routing stops working.
Likely causes
v6 only offers v7 through the upgrade channel. Most configuration converts automatically, but routing protocols, routing marks and some Wi-Fi settings changed in v7 and need checking.
Prerequisites
- A backup and an export saved to your PC (Files > drag to desktop):
/system backup save name=before-v7
/export file=before-v7- Physical or out-of-band access in case something goes wrong.
- Read the v7 changelog for your device model on mikrotik.com.
Solution (WinBox / CLI)
1. Update to the latest v6 long-term or stable first:
/system package update set channel=long-term
/system package update check-for-updates
/system package update install2. Switch to the upgrade channel and install v7:
/system package update set channel=upgrade
/system package update check-for-updates
/system package update installThe router downloads v7 and reboots. Wait several minutes; the first boot converts the configuration.
3. Update the RouterBOARD firmware:
/system routerboard print
/system routerboard upgrade
/system reboot4. Check what changed in v7:
- OSPF and BGP use new menus. See OSPF on RouterOS v7 and BGP on RouterOS v7.
- Policy routing needs entries in
/routing table. - Some newer devices use the
wifipackage instead ofwireless.
Verification
/system resource printshows version 7.x./system routerboard printshows current firmware equal to upgrade firmware.- Test internet, VPNs, routing protocols and queues.
Common errors
- Upgrading directly from a very old v6: update to the latest v6 first.
- Unplugging power during the first boot: the router may need Netinstall.
- Extra packages (for example user-manager or wireless) missing after the upgrade: download the v7 extra packages and upload them.
Rollback
Upload the v6 .npk package for your architecture to Files, then:
/system package downgradeAfter the downgrade, restore before-v7.backup if the configuration does not look right.
This topic is covered hands-on in MTCNA — MikroTik Certified Network Associate.
View MTCNA